Thermionic Culture Rooster 2 | Dual Mic Pre Amp & Equalizer | Demo Deal

Description

Thermionic Culture Rooster 2 | Dual Mic Pre Amp & Equalizer | Demo Deal
Thermionic Culture
DEMO DEAL WITH 1 YEAR WARRANTY
All valve signal path
Sowter Transformer balanced ins and outs
Unique 2 channel clean microphone amps with 'Attitude' control
Option of 2 settings to select type of introduced distortion
Versatile EQ with 'varislope' control of top and bass lift
48v Phantom Power switchable to one or both
Phase invert switch on both channels
Mic/line and DI input
Low pass and high pass filters
The Rooster 2 is a 2 channel all valve preamp with EQ and distortion controls. It is designed for a wide range of applications and can produce a large range of tones, harmonic distortion and subtle dynamic control.
The pre-amp section can be used to add gain to mic, line or DI input signals. The double triode input valve (12AX7) provides a smooth sounding gain stage after the balancing input transformer.
48 volts can be applied to phantom powered mics by using the special toggle switch. The DI input bypasses the transformer to give a suitable high impedance unbalanced input.
The 'Attitude' section provides control over the amount of distortion inherently produced by the 5654 valve.
The natural distortion figure for the Rooster 2 is well below 0.1% at low Attitude settings. As the Attitude is increased, extra harmonics, mostly musical, will be added to give a warm 'valvey' sound.
Similarly to the Culture Vulture, the unit will tend to produce predominantly more 2nd order harmonics when in 'Triode' mode and 3rd order harmonics when in 'Pentode' mode. This provides a creative means of both tone and dynamics control over the input signal as well as allowing the user to select how much and what kind of harmonics are present in the signal.
The EQ section provides a simple yet powerful musical control over frequency content.
The Bass lift control gives a continuous control over the amount of bass using a unique ' varislope' curve which peaks at 60Hz.
The 'mid/high' lift control gives a bell type curve with variable gain peaking at either 2.5KHz / 4KHz or a 'varislope' curve peaking at 12KHz, all selected by the frequency select switch.
The 'Mid cut' control provides a bell type curve centered at 700Hz with continuous control over the amount of cut.
The 'Bass cut' switched control provides 5 positions with different cutting curves. The curves start off as high pass filters which get progressively higher in frequency and then turn into a shelving type curve that will also increase in frequency as the switch is advanced. These controls are intended to interact with the other EQ controls for a very flexible control over the entire frequency range.
The 'LPF' or low pass filter switch control will allow the high frequencies to be cut at a frequency suitable to stop harsh sounding harmonics standing out when excessive distortion is used, smoothing the resulting sound.
The output level control adjusts the signal going to the PCF 80 output valve and the final signal is balanced by a Sowter custom made transformer.
The level of output signal is represented by the 3 LED display.
Pro Audio LA is an authorized dealer
Gear ships FREE via UPS/FedEx Ground w/ tracking & insurance
All transactions must be completed on eBay
About Pro Audio LA
Pro Audio LA provides solutions focused on optimizing workflows. Better workflow equals better music. We sell gear, build custom cabling, design systems, integrate systems, and install systems. We also do acoustic consulting, design, and installation for both recording studios, residential spaces, and commercial spaces.
We also have demo rooms in our store in Glendale, CA where you can come and try out gear, or rent out one of our acoustically treated rooms for a recording or podcast session.
SSL Room
Podcast Room
Visit our eBay store
here
to view all of our products and services.